USB Wifi dongle has been tested to work with the pcDuino, simply plug it into the USB port and you're ready to connect to a nearby wireless network without installing any driver!
Wifi PcDuino is a WLAN module supporting IEEE 802.11 b/g/n standards with PH connector supporting USB 2.0 .This is a low cost compact WLAN module designed in the product with embedded system for the wireless connectivity.WIFI_PCDUINO both support RT5370.WIFI_PCDUINO WLAN Module is designed to operate in 2.4GHz ISM frequency band.
Supported Operating System:
Windows 2000/XP/VISTA/Win7
Wince 5.0 & 6.0
Linux 2.6.x
.
Specification
1T1R mode with 150Mbps with PHY rates for both transmit and receiving
Dynamic data rate:
Maximum data rate up to 150Mbps
11n: Legacy, Mixed and Green Field.
Modes:
11g: 54/48/36/24/12/9/6 Mbps (Auto Sensing)
11b:11/5.5/2/1 Mbps (Auto Sensing).
Support 20MHz/40MHz Bandwidth
Security support for 64/128 bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES)
Reverse Direction Grant Data Flow and Frame Aggregation
Cisco CCX Support
USB2.0
Operating Frequency: 2.412GHz~ 2.484GHz
Transmit Output Power: 802.11g 15+/-1dBm
Receive Sensitivity 11b: -78dBm @ 11Mbps (Typical)；11g: -68dBm @ 54Mpbs (Typical)
Operating Voltage:3.3V
Antenna Port Impedance:50ohm
.
Documents
Datasheet
